Benefits of Ready Plaster

What is ready plaster?

Ready Plaster is the blend of Portland cement, fine graded sand, and water-soluble, high-quality polymer additives in the right proportion. This mixture is simply ready to use by mixing it with water at the site and can be applied on bricks, blocks, and concrete surfaces.

Ready plasters are commonly used for different purposes of exterior and interior walls. These can be easily used horizontal and vertical walls; it can also be used as patterns or textured on the flat surfaces. These can be used to cover some scratch on walls or the base coats as a conventional plaster material. It can also be used as a middle coat or as a wall finish coat.

This is a premixed plaster mixture that can only be used by adding enough water to it and then applied wherever it is necessary.

Benefits

Premixed mixture

In general, the batching of ingredients (cement, sand, and admixtures) is done at the site, with general measurements where your cant expert the perfection in the batching. But ready plaster comes with perfect batching of the ingredients and admixtures from the manufacturing unit.

Quality plastering

Ready plaster is the premixed mixture that contains a consistent quality of ingredients. These plasters are high-quality and have strong interlocking strength because of the gradation mix, and also these plasters have high water resistance properties.

Convenient to apply

Ready plaster is highly workable because of its quality consistency and well-graded ingredients, due to its high workability it is easy to apply, this plaster should be used on or before 45 minutes after mixing it with water because the reaction starts when it is mixed with water.

Low wastage

You need not sieve the sand to make it fine, because ready plaster is a premixed product where the finely graded sand is added in the manufacturing unit.

Uniform and smooth finish

Due to the well-graded and quality made ingredients ready plaster gives a uniform thickness of 3mm and smooth finish and also has the highest adhesive quality.

Structure protection

These dry plasters have the benefits of cracks protection and are thus primarily used to repair buildings. If these plasters are used in buildings walls, cracks in these walls are less likely and very durable.

Reduction in construction cost

Ready plaster is the mixture of cement, fine graded sand, polymers, and admixtures, you need not buy anything extra, and the manpower required is also very low.

Fast completion of work

Ready plaster takes 3 days for curing, after the 3 days you can start painting the surfaces and other related works.

Save water:

This plaster comes with the moisture content in it, so it requires a very minimum amount of water, the mixing process is much less complicated before application. And no curing is required for ready plaster, you can start painting the surfaces after 3 to 4 days.

Health

There are no impurities, so they have no fungi, ready plaster is fire resistance, it is also eco-friendly.