ANCHORBOND
ANCHORBOND is a two component specially formulated polyester resin-based fast setting, high strength, and corrosion resistant grout suitable for anchoring of bolts & bars into concrete, masonry, rock and metal surfaces.
Applications
- Hole Preparation: Optimum performance of AnchorBond requires rough coarse surface, dust free holes, in order to achieve proper anchoring. Use of rotary percussive drills with air or water flushing is recommended.
- In case of holes drilled on parallel sides, these should be rough enough to provide sufficient key position for anchorage.
- Bar Preparation: All bars or bolts should be de-greased and rust flakes are to be removed and surface should be roughened before use.
- Mixing of component A&B should be carried out mechanically until uniform consistency is achieved.
- Grout has to be placed within the gel time which is dependent on the temperature.
- Do not add any other substances other than component A & component B.
Advantages
- Rapid setting and strength achievement
- No expansion, no shrinkage
- Resistant to corrosion
- Resistant to vibration
- Shorter depth and smaller holes- Reduced drilling costs.
Technical Data
PARAMETERS | SPECIFICATIONS |
---|---|
Specific Gravity | 2.00 |
Pot Life(min) | 20 |
Compressive Strength (N/mm2) | 112 |
Adhesion to concrete | >tensile strength of concrete |
Packaging
1&4 kgs
Coverage
KG coverage 0.5 ltr in 0.0005m3
Shelf Life
Best before 2 years from the date manufacture when in sealed pack and stored under proper condition.
FAQs
VBond products are supplied all over india, when it is in bulk order, we have our own logistics, transportation cost is bared by the customer.
VBOND Products comes out with its own raw materials, products are tested before they are out from the factory, our own logistics.
VBond products Cost does not include raw material cost, transportation cost, and brand cost.
Yes! VBOND is ISO 9001:2015 certified along with this, it is certified by International Accreditation Forum and indian Green Building Council.
Our products does not required batching, ready to mix and use, no curing required, minimum water usage, saves yours project cost, and etc.